Stanley Bostitch MIIIFN 1-1/2- to 2-Inch Pneumatic Flooring Nailer

Product Features

• 1-1/2-inch to 2-inch pneumatic flooring nailer for driving L-shaped flooring cleats
• High-speed; extra-wide composite base; high-capacity magazine; 420 inch-pounds of driving power
• Constructed of aircraft-grade aluminum
• Includes rubber-tipped mallet
• 17-1/4 by 3-1/8 by 11-1/2; 11.2 pounds; 7-year limited warranty

Product Description

Amazon.com Product Description

The Bostitch MIIIFN Pneumatic Flooring Cleat Nailer lets you create professional-looking floors quickly and comfortably. Its high-speed pneumatic operation rapidly drives nails into both unfinished and pre-finished hardwood flooring, and its long-grip handle allows you to maintain a comfortable posture when working. Tackling prefinished flooring is no problem with the included adapter foot and the extra-wide base plates that drive staples exactly where you want them.

Amazon.com

Whether you’re a professional flooring installer or a weekend do-it-yourself warrior with a load of hardwood flooring staring at you, this nailer is far and away one of the best ways to get the job done.

Yes, it’s spendy, especially if you’re a homeowner just planning to do a couple of rooms. But if you weigh the cost of a professional installation, you come out miles ahead doing it yourself, even with this purchase, and you can work at your own pace instead of rushing a rental back to the store. If price is an obstacle, you might consider a manual nailer; you’ll pay about half as much, but you’ll do more than twice the work!

Professionals love this model, and for good reason. It’s made of aircraft-grade aluminum, so it’s light and strong. Your compressor needs to run between 60 and 100 psi, but best performance came in between 70 and 90 psi. There’s practically no learning curve, so with just a light tap of the mallet, you’ll be cruising along your flooring with 420 inch-pounds of nailing pressure.

The base plates – one is for half-inch planks, the other, ¾-inch -- are nice and wide, giving you rock-solid stability, and the magazine holds 110 fasteners, keeping reloading of your 1-1/2- to 2-inch cleats to a minimum.

We like the long-reach handle, but a shorter version is available, too. If you’re putting down hardwood or engineered flooring, you’d be doing yourself a favor by picking up this nailer. -- Kris Jensen-Van Heste

What’s in the Box
Nailer, graphite mallet, pre-finished flooring adapter foot

Porter-Cable BN200C 2-Inch 18GA Brad Nailer Kit

Product Features

• Long life maintenance-free motor to keep from staining the work surface
• Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Tool-free jam release mechanism for easy nail removal
• Rear exhaust to keep contaminates away from work
• Drives 18 gauge nails from 5/8-Inch to 2-Inch length

Product Description

The Porter-Cable BN200C 18GA 2-Inch Brad Nailer Kit has a magnesium body that delivers both a strong and lightweight design. The brad nailer features a removable non-marring nose tip with on tool storage as well as an integrated rubber grip for improved comfort. The BN200C is equipped with a low nail reload indicator to help alert when to reload and has a special hardened driver blade for longer life. The BN200C kit includes 500 nails of 1-1/4-Inch, carrying case, and owners manual.

Professional Woodworker 7613 3 Piece Pneumatic Nailer Combo Kit

Product Features

• 3 Piece Pneumatic Nailer Combo Kit
• 3-1/2 Inch 34 Degree Clipped D Head Framing Nailer - Air Pressure: 75-120PSI; 90pc magazine
• 15 Gauge 2-1/2 inch 34 Degree Angle Finishing Nailer - Air Pressure: 75-120 PSI; 100 pc magazine
• 18 Gauge 1-1/4 inch Brad Nailer - Air Pressure: 60-100 PSI; Drives 3/8 in - 1-1/4in Brads; 100pc magazine
• Blow mold case included

Product Description

From the Manufacturer

The Professional Woodworker 3 Piece Nailer Combo Kit offers nailers for a variety of applications. The Professional Woodworker 34 degree 3-1/2 inch Clipped D Head Framing Nailer operates at 75-120 PSI and its magazine can hold 90 Senco style nails. The Professional Woodworker15 Gauge 2-1/2 inch Finishing Nailer operates at a pressure of 75-120 PSI and its magazine can hold 100 nails. The Professional Woodworker 18 Gauge 1-1/4 Inch Brad Nailer operates at a pressure of 60-100 PSI. The magazine can hold 100 nails and can drive nails ranging from 3/8 inch to 1-1/4 inch. The kit includes gun oil, Allen keys and a male plug. The blow mold case allows for the nailers to be securely held when not in use.

Product Description

Professional Woodworker 3 - Pc. Pneumatic Nailer Combo Kit with Brad Nailer, Framing Nailer and Finish Nailer. 3 Pneumatic Nailers for a variety of home woodworking and do-it-yourself applications, a tremendous value! Includes a 31/2" Clipped D Head Framing Nailer (75-120 psi, 90-Pc. magazine), a 15-ga. 2 1/2" 34 deg Angle Finish Nailer (75-120 psi, 100-Pc. magazine), and an 18-ga. 1 1/4" Brad Nailer (60-100 psi, drives 3/8"-1 1/4" brads, 100-Pc. magazine). Also includes a blow-molded case, allen keys and a male plug. Order yours today! Professional Woodworker 3-Pc. Pneumatic Nailer Combo Kit

Stanley Bostitch PN100K Impact Nailer Kit

Product Features

• Palm nailer kit; ergonomic design; magnetic nose;
• Ideal for driving common bulk nails-inch confined areas or for nailing off metal connectors and joist hangars
• Hardened steel nose for durability; leather glove
• Includes nailer, standard nose, finish nail nose, large bore nose, leather glove, nose wrench, hex wrench, lubricant, spare O-rings
• 5.25 by 3.5 by 4.13-inches; 2.9-pounds; 7-year limited warranty

The Bostitch story
Originally known as the Boston Wire Stitcher® Company, the first syllables of the words "Boston" and "Stitcher" were joined to make "Bostitch®", and the name was adopted for product use after the manufacture of machines began. Thomas Briggs, the founder, invented in 1896 a new kind of user friendly Wire Stitcher designed for fastening books, calendars, checks, hat boxes, etc. This machine made a staple or stitch as it was called from a coil of wire. It was called the Boston Wire Stitcher and the company was named the Boston Wire Stitcher Company. In 1903 the company invented a foot operated stapling machine that used pre-formed staples. These staples were not collated but had to be slid off of a track into the magazine of the machine. Later they were collated with paper and then glue. Soon the Boston Wire Stitcher Company was developing various kinds of staplers for industrial markets. In 1930 the Bostitch® Sales Company was formed to sell Bostitch® products, and in 1948 the Boston Wire Stitcher Company officially became Bostitch®, Inc. The first Coil Nailer from Bostitch, the N2, came on the scene in 1965, and the rest is history. Today, Bostitch sells a huge range of nailers, compressors, and other products, and is a leader in the industry.

Most Helpful Customer Reviews

164 of 166 people found the following review helpful

5.0 out of 5 stars Pneumatic Palm Nailer February 27, 2002

By D. Beach

I recently retired and have undertaken a project to build a woodworking shop-garage. Swinging a hammer has become a very tiresome chore, and I was considering the purchase of a framing nailer. Upon reviewing information from various manufacturers, I realized that a framing nailer is a very specialized tool.
However, I happened to run across information about palm nailers. In reviewing the information provided by Amazon, I read that a palm nailer can be used for nailing any size nail and in many different applications. I could see where this would be a more useful tool than a framing nailer. I purchased the Bostitch PN100 kit, and immediately started using it with 16d nails in framing my new shop. I then used 10d nails in decking the roof. All I can say is this nailer is wonderful!! It drives nails quickly, at any angle, and in a limited amount of space. You do have to be careful to make sure that the alignment of the nail with the nailer is correct; if not, bent nails will result. However, with just a little practice, nailing becomes an effortless operation. I would recommend this as a general purpose nailer to anyone. I might also add that I own a brad nailer and a roofing nailer made by Porter Cable, and a 1/4 inch crown stapler, and the Bostitch nailer works as well as any of them.

NuMax SBR50 18 Gauge 2-Inch Brad Nailer

Product Features

• 1 Year Warranty
• Adjustable Exhaust
• Air Filter
• High Quality Internal Parts
• Hardened Driver Blade

Product Description

From the Manufacturer

Features: 360 Degree Adjustable Exhaust, Aluminum Cylinder, Air Filter / Dust Cap, Reversible Belt Hook, One Piece Drive Blade, with Oil and Wrenches Included. The NuMax straight 2-Inch Brad nailer has a lightweight aluminum design and a tool-free adjustable exhaust that conveniently directs exhaust away from your face. The 18g 2-Inch brad nailer is great for interior and exterior finish and trim, furniture, cabinet work, crafts, and hobbies. This tool is manufactured under the strict guidelines for quality control. NuMax Pneumatic line of nailers was developed with the professional in mind. NuMax guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to the professional and Do-it Yourselfers alike. NuMax nail guns are backed by our 1 Year Limited Warranty. If your NuMax tool ever needs service please read our warranty policy for complete details. Please contact us with any question regarding your NuMax Nailer at: www.NuMaxtools.com or by calling 888-669-5672.

Product Description

SBR50 Features: -Brad nailer.-360 Adjustable exhaust.-Anti-dust cap.-Ergonomically designed comfort grip.-Reload indicator. Includes: -Oil and wrenches included. Construction: -Die-cast aluminum construction. Dimensions: -Dimensions: 10.5'' H x 9.5'' W x 2.5'' D. Warranty: -1 Year limited warranty.

Most Helpful Customer Reviews

6 of 6 people found the following review helpful

5.0 out of 5 stars Superb product and exceptional value! April 4, 2011

By G. mica

Amazon Verified Purchase

THis product is lightweight, well balanced, and has a soft rubber grip. There are a lot of finishing nail guns in the $20-50 range, after a lot of searching around I opted for this one. I have owned a few other brands some costing more and some less..generally after thousands of nails some problems would arise.. this is normal wear and tear and its easier to purchase a new and reliable gun over rebuilding the many seals and pistons in the gun.
My first option was to purchase a rebuilt Bostitch or similar high dollar gun - I decided against that seeing how many of the guns took beatings under the abuse of contractors.
Next I ruled out Chicago because the body seemed flimsy and prone to leaks at the main valve seal.Previously owning a Central Pneumatic unit (which comes with a case for the same price) the only reason I didnt buy another is the saftey is bulky and prone to getting bent out of shape. The gun then doesnt fire as easily, and you have to make sure the tip is pressed AND the safety is satisfied.
This gun has good reviews all around, solid construction, and it shoots Brad nails upto 2" (all the way down to 1/2"). No case included and I would replace the air inlet adapter with quality one. Oil frequently.

Freeman P4FRFNCB Framing

Product Features

• Anodized aluminum magazine holds up to 100 nails for high production applications and the framing nailer can hold up to 55 nails
• Anodized aluminum cylinder provides a durable surface when the piston is firing and retracting, which leads to less wear on the internal parts
• Finger depth adjustment sets nail to desired depths quickly and conveniently and comes with a no-mar pad to prevent surface damage
• Quick jam release (Brad Nailer, Stapler and Angle Finish Nailer) opens nail gun assembly to easily clear jammed nails to minimize downtime
• Teflon O-rings provide less wear and tear on cylinders and pistons ensuring longer life on internal wearable parts

Product Description

The Freeman 4-Piece finishing/framing combo kit is a contractors dream. This kit covers your framing to your finishing needs. The Freeman P4FRFNCB includes a 21-Degree Full Head Framing Nailer (PFR2190), 34-Degree 15-Gauge Angle Finish Nailer (PFN1564), 1-1/4 18-Gauge Brad Nailer with Quick Release (PBR32Q), 1-1/4 18-Gauge Narrow Crown Stapler with Quick Release (PST9032Q), oil, goggles, wrenches, manuals and a copy of the Freeman 7-year limited warranty, all within a canvas carrying bag. Freeman Pneumatic nailers are manufactured under the strict guidelines to ensure professional-grade standards. The Freeman P4FRFNCK is also backed by our 7 year warranty.

Most Helpful Customer Reviews

1 of 1 people found the following review helpful

5.0 out of 5 stars update August 28, 2012

By jerry b

Amazon Verified Purchase

This is an update. Have used my nail guns and can't say enough good about them. I was able to get all the needed staples, brads,finish nails,framing nails. Was able to get all of them at orchard supply no problem.I had a project I wanted to do after recieving the nail gun set.I was able to use my finish nailer and the framing gun.I test fired the brad and staple gun also. These babys are great. I don't think buying the big name guns justify the big price when you can do as good with this great set. Like I have stated before I now do as much business with Amazon as possible.The prices are great and the service is #1. You do need air to run these guns but don't seem to be real demanding for air.I'm doing projects around my home now that I have put off.There is nothing better then having the right tool and do it yourself not to speak of the money you save doing it yourself.

Comment |

Was this review helpful to you?

Yes

No

5.0 out of 5 stars DIY great! September 5, 2012

By texinstyle

Amazon Verified Purchase

i am a home owner that likes to address thing myself. this seems like a pretty good set for the money and does everything i need it to. has saved me tons of time and money doing it myself in a fraction of the time. a must have for my shop.

Porter-Cable BN200B 5/8-Inch to 2-Inch 18-Gauge Brad Nailer

Product Features

• Long life maintenance-free motor to keep from staining the work surface
• Internal piston catch for consistent max power on every shot
• Rear exhaust to keep contaminants away from work
• Drives 18 ga. nails from 5/8-inch to 2-inch length; Tool-free depth-of-drive adjustment with detents for proper setting of nail heads
• Measures 9-3/4by10.4 inches; weighs 2.6 pounds

Special Offers and Product Promotions

• Get free shipping on this item when you spend $199.00 or more on Qualifying Items offered by Acme Tools. Free shipping consists of Fed Ex ground or ABF Freight with lift gate/curbside over 150 lbs. Here's how (restrictions apply)

Product Description

Amazon.com Product Description

The Porter-Cable BN200B 5/8-to-2-inch 18-gauge Brad Nailer comes with a maintenance-free motor for added reliability and long tool life. With the ability to drive 5/8-to-2-inch 18-gauge nails, this brad nailer features an internal piston catch for consistent maximum power on every shot and a rear exhaust to keep debris away from the work piece. Also included is a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, a tool-free jam release mechanism for easy nail removal, and a sequential style trigger with a lock off switch. Other features include a contact safety located behind the driver guide for better visibility, an adjustable belt hook, an integrated rubber grip for improved comfort, and a low nail reload indicator. With a 100-nail magazine, this nailer operates at 70-to-120 PSI for added versatility. Its strong and lightweight die-cast aluminum body measures 9-3/4 x 10.4 inches and weighs 2.6 pounds.

From the Manufacturer

Featuring a long life maintenance/oil-free motor that prevents oil from staining the work surface, an internal piston catch for consistent max power on every shot, and a rear exhaust that keep contaminates away from work, the BN200B marks a resurgence in the line of Porter Cable finish nailers. With the ability to drive 18 gauge nails from 5/8” to 2” length, a tool-free depth-of-drive adjustment with detents for proper setting of nail heads, tool-free jam release mechanism for easy nail removal, a sequential style trigger with lock off switch and a removable non-marring nose tip with on tool storage, the BN200B meets all of the requirements that the discerning end user demands. Includes: 1,000 18 Ga. 1-1/4" brad nails, 1/4" fitting, safety glasses carrying case.

Most Helpful Customer Reviews

32 of 32 people found the following review helpful

5.0 out of 5 stars Easily one of my favorite power tools February 20, 2009

By Tim in Mint Hill

I purchased this particular item because of its better range of brad sizes it can handle, and the Porter Cable name, good reviews, etc.
I have been using this nailer quite often, and am now left with several boxes of finish nails I will likely never use again. No more getting the nailsets out to bury a finish nail down on a piece of trim, etc.
The options for using this are endless. Just last night, I needed to make a couple wood boxes to hold scrap in my workshop area, and had some scrap 3/8" plywood, perfect for the boxes. Using this nailer, I could quickly apply a little glue, between corners of the box, and shoot a couple brads in and done. Can't do that with finish nails on plywood without splitting out alot.
Great tool, highly recommended, easy to handle.

Stanley Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing

Product Features

• 1-1/2-inch to 3-1/2-inch framing nailer; 1,050 inch-pounds of driving power; sequential and bump trigger
• 2 nailers in one: includes two quick-change nosepieces, converts to framing or metal connector applications
• Lightweight magnesium housing; integrated rubber skid pads; rubber grip
• Includes 1 framing nailer
• 14-1/4 by 20-1/2 inches; 8.1 pounds; 7-year limited warranty

Product Specifications

Part Number	2750-5528
Power Source	air-powered
Item Package Quantity	1
Weight	8 Pounds
Length	23 inches
Width	16 inches
Height	6 inches

Product Description

Amazon.com Product Description

The Bostitch F21PL Round-Head Framing Nailer is the ideal tool for framing, sheathing, subflooring, and bracing jobs. Perfect for professionals and weekend warriors alike, this nailer features a strong, lightweight magnesium body, quick-change nosepieces for plastic-collated and metal-connector nails, a 16-inch layout indicator, and more.

Designed to Match the Task at Hand
The recommended tool for use with HurriQuake disaster-resistant nails, the F21Pl has a patented feature that lets you set nail depth with the simple push of a button. For further convenience, quick-change nosepieces let you switch from plastic-collated framing nails to metal connector nails in seconds.

The high-capacity magazine holds up to 60 plastic collated 21-degree framing nails (2.0-3.5 inch) or 60 metal connector nails (1.5-2.5 inch). Its 16-inch layout indicator, located on the magazine, lets you know at a glance the correct distance between studs.

And with an adjustable rafter hook, you can conveniently hang the nailer on joists and rafters during work breaks.

Most Helpful Customer Reviews

Excellent nailer, July 19, 2012

By 

Joshwht - See all my reviews

Amazon Verified Purchase(What's this?)

This review is from: Stanley Bostitch F21PL Round Head 1-1/2-Inch to 3-1/2-Inch Framing Nailer with Positive Placement Tip and Magnesium Housing (Tools & Home Improvement)

I am very happy with this nailer. Nailer comes with second tip for attaching metal connectors when framing. I like the plastic collated design because you can shoot full round head nails. Also comes with 2 triggers so that you can fire nails by holding the trigger and bumping the tip or fire nails only if the tip has been pressed down and you then pull the trigger. Great gun.

Freeman PFL618BR 3-in-1 Pneumatic Flooring Nailer

Product Features

• Shoots three types of fasteners without changing magazine rail T-cleats L-cleats and staples
• Anodized aluminum and oil-less parts for extended wear
• Durable plastic carrying case
• Interchangeable floor plates for different thicknesses of flooring
• 7-year limited warranty

Product Description

From the Manufacturer

Freeman PFL618BR 3-in-1 flooring stapler, T-Cleat, and L-Cleat nailer combination is the work horse in the Freeman line-up. Our gun shoots both cleated nails and staples. It shoots 15.5- and 16-gauge staples ranging from 1 to 2 inches, and "L/T" cleats ranging from 1-1/2 inches to 2 inches. The 3-in-1 magazine has a capacity of 100-120 staples/cleats. The body of this gun is constructed of durable die-cast aluminum for job site dependability for daily use. It comes with two composite non-marring base plates for added stability and protection against scratches to the flooring surface. The interchangeable base plates allow you to install 1/2- to 3/4-inch nail-down flooring. It provides a convenient long reach handle with a padded grip. Internally, the driver blade is constructed of a very tough heat-treated one-piece hardened steel, aluminum cylinder, high quality rubber o-rings, and internal air filter. This tool comes with carrying case, oil, wrenches, goggles, and a no-mar white rubber mallet. This tool is manufactured under the strict guidelines for quality control. Each gun is tested before it is approved for shipping. Freeman Pneumatic line of nailers was developed with the professional in mind. Our company has worked diligently to develop a product that could meet the demands of the Professional customer and still hold true to the value associated with our product and its price point. Freeman guns are sold, distributed, serviced, and warranted by a US company, Prime Global Products, Inc. PGP is proud to offer our nailers to professionals and do-it-yourselfers alike. Freeman nail guns are backed by our 7-year limited warranty. If your Freeman tool ever needs service please read our warranty policy for complete details.

Most Helpful Customer Reviews

75 of 80 people found the following review helpful

4.0 out of 5 stars If it was made in USA it would of been 5 stars but still, Already worth the cost! October 3, 2010

By Corkery Woodworks

I am a flooring contractor and after using $480 flooring nailers for the past 7 years, I can say this is well worth it. My previous nailer bit the dust in the middle of a job and I rented one from "rip off Depot" and after spending $70 on a day and a half rental I figured I would order this one to at least get me past this flooring job and then cross my fingers for the next. I can honestly say that this is as good or better than both of my Bostich staple nailer and cleat nailer (each over $450!!!). Also, keep this in mind, all these nailers are made in China, none are made in the USA anymore. Bostich or aka Stanley used to make their nailers in the USA and it was worth the price but they have since fired all they american laborers and have not lowered their prices dispite the 1/4 cost of building the nailer since being built in China, now they are made in China for about 1/4 the cost and the rest is now in the wallets of CEO's of Stanley/Bostich so it really doesn't matter anymore( damn shame to). Stanley /Bostich is simply riding on their name. All the brands are pretty much the same now a-days unfortunetly. The 7 year warranty caught my eye and is key. This is definetly a no brainer. Here are a few obvious perks ...
Freeman Nailer ($190) 7 year warranty - Bostich - ($470 +) 7 year warranty
Freeman Nailer T, L & Staples ($190) Bostich - Staples only! want L cleats? Spend another $470 ($960+)
Freeman Made in China Bostich - Made in China
Freeman Decent durable plastic Carrying Case Bostich - Cardboard Box & some used tape
Freeman Parts - Aluminum Bostitch Parts - "aircraft grade aluminum" i.e. ...um, Aluminum!
Freeman Rubber Mallet, Oil, wrenches Bostich - Rubber Mallet
The bottom line is this: If this Freeman nailer gets me past 5 years of service then It did the job and I made an Excellent investment. If it gets me past 2 years than I still made out. Not to mention they also have a seven year warranty and I did call their support before hand and tell them I had a broken one and they said they would send me a new one with shipping sticker to send old one back ( I always do this with expensive tools), so they seem to be standing behind their warranty. Also, this nailer shoots three different type of nails! So save your $280 for something else nad buy the Freeman. Only thing they need to do now is make the damn thing in the USA then I would REALLY be impressed and give the 5 stars! Also, "Aircraft grade Aluminum" is like saying my t- shirt is made of "aircraft grade cotton" ... there are 15 grade types of Aircraft aluminum and guess what- even Harbor Frieght tools are technically "aircraft grade Aluminum". Once again Bostich/Stanley is trying to screw with our heads, banking on hte name and robbing you blind.

Stanley Bostitch PN50 Mini Impact Nailer

Product Features

• Rubber grip designed to insulate and reduce vibration
• Weighs only 1 lb.
• 360° swivel air fitting for maximum accessibility
• Front exhaust directs air away from users palm
• Drives most common bulk finish, framing & timber nails

Product Specifications

Part Number	PN50
Power Source	air-powered
Item Package Quantity	1
Weight	16 Ounces
Length	19.88 inches
Width	8.06 inches
Height	9.69 inches

Product Description

From the Manufacturer

The Bostitch PN50 Mini Impact Nailer has a rubber grip designed to insulate and reduce vibration. Lightweight at only 1 lb. It has a 360° swivel air fitting for maximum accessibility in tight spots. The front exhaust directs air away from users palm. Drives Most Common Bulk Finish, Framing & Timber Nails. Ideal in applications such as; Joist Hangers, Metal Connectors, and Driving Nails Into Confined Areas.

Product Description

Includes Mini Impact Nailer - PN50, 360 degree swivel air fitting

Most Helpful Customer Reviews

12 of 12 people found the following review helpful

5.0 out of 5 stars I'm never picking up a hammer again! August 19, 2010

By Jason Peacock

I giggled the first time I used this, it drives nails with such ease - as if the wood was butter.
It's great for metal fasteners and tight spaces, it gets into all the small corners where neither a full size nail gun nor a hammer would fit.
The small size is a perfect fit for my (large) hand, and squeezes into smaller places than the larger model palm nailer.
The magnet holds the nails well so you can drive them with one hand, just press and the nail is quickly hammered (vibrated?) into place.
You can stop early and leave the nail head up if you're just tacking things, or come back later and finish the nail flush.

Hitachi NT50AE2 18-Gauge 5/8-Inch to 2-Inch Brad Nailer

Product Features

• Pneumatic finish nailer accepts 5/8- to 2-inch 18-gauge brad nails
• Depth of drive dial for a professional finish
• Quick and simple nail jam extraction
• Includes safety glasses, air fitting, hex bar wrenches, carrying case, no-mar tip
• Measures 10-inches by 9.25 inches (LxH); lightweight and well-balanced at 2.2 pounds

Product Specifications

Part Number	2750-7201
Power Source	air-powered
Item Package Quantity	1
Batteries Included?	No

Most Helpful Customer Reviews

60 of 61 people found the following review helpful

5.0 out of 5 stars Excellent Tool December 10, 2006

By Josephine J. Willard

This is one of the best tools I have ever had. Operates flawlessly every time. I use Bostich nails/brads because they are easier to find (all sizes up to 2") and the nailer works perfectly. The "height" adjustment is easy. The "jam release" mechanism is great - but the tool has never jammed. Excellent Product! James Willard